2018

White Gold Corp. Intersects 3.76 g/t Gold over 66.2m Successfully Extending the Golden Saddle Deposit at Depth and Also Discovers New Mineralized Zone "GS West" Located 750m Along Trend from the Golden Saddle Deposit

October 16, 2018

White Gold Corp. (TSX.V: WGO, OTC – Nasdaq Intl: WHGOF, FRA: 29W) (the "Company") is pleased to announce that a new shallow zone of gold mineralization has been discovered on trend with the Golden Saddle deposit at the Golden Saddle West (“GS West”) target on its White Gold property, Yukon. The GS West target is located approximately 750m west of the Golden Saddle deposit, along a structural trend containing several other targets, including the high-grade Ryan’s Showing discovery announced September 6, 2018.

Step out and infill drilling at Golden Saddle has also continued to return significant results, expanding the footprint and definition of the deposit. Maps to accompany this news release can be found at http://whitegoldcorp.ca/investors/exploration-highlights/.

The Company is also currently drilling at its JP Ross property to follow up on the high-grade Vertigo discovery as part of its fully funded regional exploration program backed by partners Agnico Eagle Mines Limited (TSX: AEM, NYSE: AEM) and Kinross Gold Corp (TSX: K, NYSE: KGC). Additional results will be released in due course, along with further results from the additional testing performed along trend with the Golden Saddle Deposit on its White Gold property including the Ryan’s Showing discovery.

Highlights Include:

  • WHTGS18D0194 intersected 6.90 g/t over 23.64m from 427.11m depth, within broader mineralization of 3.76 g/t Au over 66.2m from 385.2m depth and 2.32 g/t Au over 115.61m from 346.24m depth extending the GS Main Zone and high-grade core of the Golden Saddle deposit by 60m (14%) down-dip in the area.
  • GS West: A new shallow mineralized zone open at depth and along strike was discovered 750m to the west of the Golden Saddle deposit along the structural trend, intersecting Golden Saddle style mineralization in all three holes, including 1.92 g/t Au over 24m from 117m depth WHTGS18D0184 within broader mineralization of 2.97 g/t Au over 10m from 118m depth.  
  • WHTGS18D0193 intersected 3.95 g/t Au over 68m from 210m depth, including 5.42 g/t Au over 47.3m from 225.7m depth, and 9.55 g/t Au over 11.9m from 256m depth infilling a 70m gap in the GS Main Zone and extending mineralization towards surface. This intercept represents one of the strongest and most consistent intercepts of high-grade (>5 g/t Au) mineralization to date for the Golden Saddle.
  • WHTGS18D0191 extended the projection of the GS Main Zone approximately 200m (69%) down dip in the area, intersecting 4.87 g/t Au over 6.3m from 362m depth within broader mineralization of 1.95 g/t Au over 22.3m from 347.6m depth.
  • The Company continues to test additional targets along trend with the Golden Saddle deposit as part of the program designed to expand the existing resource on the White Gold property, with only limited historical exploration having been performed in these areas.

“We are very pleased with these results from our 2018 program on the White Gold property. Making up approximately half of our 2018 budget, the goal of this program was to grow the Golden Saddle deposit through expansion along strike and down dip as well as through the discovery of new mineralization within close proximity to the deposit.” stated Jodie Gibson, VP Exploration of the Company.  “Our program has done just that – making meaningful step outs to the deposit and also making two significant discoveries this year along trend with Golden Saddle. With only limited exploration performed in the area, we are very optimistic about the potential for additional mineralization in close proximity to the Golden Saddle deposit.”

GS West Target, White Gold Property
The GS West is located approximately 750m west from the western edge of the Golden Saddle. Drilling on the target area consisted of 3 wide spaced holes testing over 350m of strike length. The purpose of the drilling was to evaluate the area for Golden Saddle style mineralization based on a revised geologic interpretation and projection of the Golden Saddle structural system. All three holes hit Golden Saddle style alteration and mineralization with the most significant results from WHTGS18D0184. Individual assays ranged from trace to 9.7 g/t Au.

WHTGS18D0184 returned 1.92 g/t Au over 24m from 117m depth, including 2.97 g/t Au over 10m from 118m depth and 8.12 g/t Au over 1.95m from 121.05m depth. The mineralization is associated with a strongly sericite altered, coarse grained, augen orthogneiss with pyrite and molybdenite filled fractures, quartz veining, and localised brecciation. The zone occurs along the projection of the GS Main structure to the west and highlights the significant potential for additional zones of near surface mineralization in close proximity to the Golden Saddle deposit.

The newly discovered zone was targeted with a revised geologic modeling based on DIGHEM, IP-Resistivity and historic drilling. The holes were targeting the interpreted intercept of the GS Main structure with a favorable felsic gneiss unit that hosts the majority of the resource in the adjacent Golden Saddle deposit. The discovery highlights the potential for additional, new surface, zones of mineralization adjacent to the Golden Saddle. Detailed geological modelling is in progress and will form the basis of follow up drilling in 2019.

Significant drill results from the Golden Saddle West target are included in the table below:

Hole ID Target Area From(m) To(m) Int(m) Au(g/t)
WHTGS18D0184 GS West 117.00 141.00 24.00 1.92
Incl.   118.00 128.00 10.00 2.97
Incl.   121.05 123.00 1.95 8.12
WHTGS18D0185 GS West 146.00 158.65 12.65 0.41
Incl.   157.90 158.65 0.75 3.99
And   260.50 266.00 5.50 0.65
WHTGS18D0186 GS West 290.97 292.02 1.05 1.59

There is not currently enough information to estimate true thickness of the mineralization on the GS West at this time.

Golden Saddle Deposit, White Gold Property
A total of 8,745m of diamond drilling over 18 holes was conducted on the Golden Saddle. The drilling included infill drilling for advanced metallurgical testing; aggressive step-out drilling down dip to assess continuity of the mineralized structures to depth and a series of holes for geologic modelling and to assess the continuity of mineralized zones within the hanging wall of the deposit. Results for the infill/metallurgical holes were previously released and include 6.89 g/t Au over 32.0m from 171m depth, including 11.08 g/t Au over 18.4m from 188m depth. Results for 10 additional holes are presented in the table below. Highlights include holes WHTGS18D0191, WHTGS18D0193 and WHTGS18D0194. Individual assays for the released results range from trace to 37.5 g/t Au and reported intercepts are estimated to range from 65 – >95% true thickness.

Significant drill results from the Golden Saddle included in this release are detailed in the table below:

Hole ID Target Area From(m) To(m) Int(m) Au(g/t)
WHTGS18D0178 Golden Saddle 448.70 452.80 4.10 1.62
And   473.00 478.10 5.10 2.50
Incl.   477.00 478.10 1.10 5.51
WHTGS18D0183 Golden Saddle 426.00 480.55 54.55 1.20
Incl.   468.00 480.55 12.55 2.67
Incl.   475.08 480.55 5.47 4.71
Incl.   477.90 480.55 2.65 7.02
And   587.85 594.00 6.15 1.75
WHTGS18D0187 Golden Saddle 458.55 488.00 29.45 0.90
Incl.   479.05 488.00 8.95 1.97
And   505.17 507.00 1.83 3.52
WHTGS18D0188 Golden Saddle 35.23 40.72 5.49 0.90
And   248.00 254.00 6.00 1.12
And   557.00 565.00 8.00 1.30
Incl.   559.44 560.42 0.98 3.52
WHTGS18D0189 Golden Saddle 227.00 244.60 14.60 0.32
Incl.   229.00 230.00 1.00 1.04
WHTGS18D0190 Golden Saddle 309.35 317.00 7.65 3.07
Incl.   312.25 316.00 3.75 5.10
And   551.70 552.63 0.93 9.85
WHTGS18D0191 Golden Saddle 347.63 369.90 22.27 1.95
Incl.   362.00 368.33 6.33 4.87
WHTGS18D0192 Golden Saddle 389.35 393.7 4.35 3.56
And   434.00 442.00 8.00 1.86
Incl.   439.68 440.84 1.16 6.44
WHTGS18D0193 Golden Saddle 210.00 278.00 68.00 3.95
Incl.   225.70 273.00 47.30 5.42
Incl.   256.00 267.90 11.90 9.55
WHTGS18D0194 Golden Saddle 346.24 451.26 115.61 2.32
Incl.   385.23 450.75 66.23 3.76
Incl.   427.11 450.75 23.64 6.90
Incl.   440.20 450.75 10.55 14.21
         

WHTGS18D0194
WHTGS18D0194 returned 2.32 g/t Au over 115.61m from 346.24m depth, including 3.76 g/t Au over 66.23m from 385.23m depth, including 6.90 g/t over 23.64m from 427.11m depth, including 14.21 g/t Au over 10.55m of from 440.2m depth. The hole was drilled from the same site as holes 189/190/191, but at an azimuth 80o and -68o dip, and was targeting the down-dip intersection of the GS Main and a cross-cutting thrust fault that hosts lenses of ultramafic rocks (serpentinite) within the core of the Golden Saddle. This intersection appears to be a significant control on high-grade (>3 g/t Au) mineralization within the deposit, and the intercept extended the GS Main, and high-grade core of the deposit, an additional 60m down-dip in the area.

WHTGS18D0193
WHTGS18D0193 is located 360m east of WHTGS18D0194 and was drilled at an azimuth of 225o and -50o dip. The hole was designed to drill across host lithologies in the Golden Saddle, which are oblique to mineralization, for geologic modelling purposes. Additionally, the hole would test for mineralization associated with lithologic contacts in the hanging wall of the deposit and infill the GS Main at depth. The hole returned 3.95 g/t Au over 68m from 210m depth, including 5.42 g/t Au over 47.3m from 225.7m depth and 9.55 g/t Au over 11.9m from 256m depth. The intercept corresponds to the GS Main infilling a 70m gap between holes WD-070 and WHTGS17D0170.

WHTGS18D0191
WHTGS18D0191 is located on the NW portion of the Golden Saddle and was drilled to assess the down dip potential of the GS Main Zone. The hole was drilled at a 160o azimuth and -85o dip and returned 1.95 g/t Au over 22.27m from 347.63m depth, including 4.87 g/t Au over 6.33m from 362m depth. The intercept extends the projection of the GS Main approximately 200m down dip from historic hole WD-053.

Two additional holes were drilled on the same section as WHTGS18D0191, WHTGS18D0189 and 190, at dips of -65o and -75o; respectively. WHTGS18D0189 is a 75m step-out to WD-053 and returned 0.32 g/t Au over 14.6m from 227m depth. While WHTGS18D0189 and WHTGS18D0190 are lower in grade due to the intersection of less favorable schistose lithology, they confirmed the extension of the GS Main structure. WHTGS18D0190 is a 55m step-out to hole 189 and returned 3.07 g/t Au over 7.65m from 309.35m depth, including 5.1 g/t Au over 3.75m from 312.25m depth. WHTGS18D0191, detailed above, was a further 70m step-out to hole 190. Together the GS Main has been traced from surface to 490m down-dip, and is open at depth, in this area of the deposit.

About White Gold Corp.
The Company owns a portfolio of 21,218 quartz claims across 34 properties covering over 423,000 hectares representing over 40% of the Yukon’s White Gold District. The Company’s flagship White Gold property has a mineral resource of 960,970 ounces Indicated at 2.43 g/t gold and 282,490 ounces Inferred at 1.70 g/t gold as set forth in the technical report entitled “Independent Technical Report for the White Gold Project, Dawson Range, Yukon, Canada”, dated March 5, 2018, filed under the Company’s profile on SEDAR. Mineralization on the Golden Saddle and Arc is also known to extend beyond the limits of the current resource estimate. Regional exploration work has also produced several other prospective targets on the Company’s claim packages which border sizable gold discoveries including the Coffee project owned by Goldcorp Inc. (TSX: G, NYSE:GG) with a M&I gold resource(1) of 4.1M oz and Western Copper and Gold Corporation’s Casino project which has P&P gold reserves(1) of 8.9M oz Au and 4.5B lb Cu. The Company has outlined an aggressive exploration plan backed by partners Agnico Eagle Mines Limited (TSX: AEM, NYSE: AEM) and Kinross Gold Corp (TSX: K, NYSE: KGC). For more information visit www.whitegoldcorp.ca.

(1)           Noted mineralization is as disclosed by the owner of each property respectively and is not necessarily indicative of the mineralization hosted on the Company’s property.

QA/QC
The analytical work for the 2018 program has been performed by Bureau Veritas Commodities Canada Ltd., an internationally recognized analytical services provider, at its Vancouver, British Columbia laboratory.  Sample preparation was carried out at its Whitehorse, Yukon facility. All GT Probe, RAB, RC, and diamond core samples were prepared using procedure PRP70-250 (crush, split and pulverize 250 g to 200 mesh) and analyzed by method FA430 (30g fire assay with AAS finish) and AQ200 (0.5g, aqua regia digestion and ICP-MS analysis). Samples containing >10g/t Au were reanalyzed using method FA530 (30g Fire Assay with gravimetric finish). Metallic-screen analysis may also be utilized if coarse gold mineralization is encounter (FS600).

The work was completed using industry standard procedures, including a quality assurance/quality control (QA/QC) program consisting of the regular insertion of certified standards and blanks into the sample stream. The qualified person detected no significant QA/QC issues during review of the data.

Qualified Person
Jodie Gibson, P.Geo. and Vice President of Exploration for the Company is a “qualified person” as defined under National Instrument 43-101 (“NI 43-101”) and has reviewed and approved the content of this news release. 

Cautionary Note Regarding Forward Looking Information
This news release contains "forward-looking information" and "forward-looking statements" (collectively, "forward-looking statements") within the meaning of the applicable Canadian securities legislation. All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that involves discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as "expects", or "does not expect", "is expected", "anticipates" or "does not anticipate", "plans", “proposed”, "budget", "scheduled", "forecasts", "estimates", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking statements. In this news release, forward-looking statements relate, among other things, to: the anticipated benefits to the Company and its shareholders respecting the Company’s objectives, goals and exploration activities conducted and proposed to be conducted at the White Gold properties; future growth potential of the Company, including whether any further mineral resources will be established in accordance with NI 43-101 at any of the Company’s properties; exploration results; and future exploration plans.

These forward-looking statements are based on reasonable assumptions and estimates of management of the Company at the time such statements were made. Actual future results may differ materially as forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to materially differ from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors, among other things, include: the expected benefits to the Company relating to the exploration conducted and proposed to be conducted at the White Gold properties; failure to expand or identify any additional mineral resources; the preliminary nature of metallurgical test results; uncertainties relating to the availability and costs of financing needed in the future, including to fund any exploration programs on the White Gold properties and the Company’s other properties; business integration risks; fluctuations in general macroeconomic conditions; fluctuations in securities markets; fluctuations in spot and forward prices of gold, silver, base metals or certain other commodities; fluctuations in currency markets (such as the Canadian dollar to United States dollar exchange rate); change in national and local government, legislation, taxation, controls, regulations and political or economic developments; risks and hazards associated with the business of mineral exploration, development and mining (including environmental hazards, industrial accidents, unusual or unexpected formations pressures, cave-ins and flooding); inability to obtain adequate insurance to cover risks and hazards; the presence of laws and regulations that may impose restrictions on mineral exploration and mining; employee relations; relationships with and claims by local communities and indigenous populations; availability of increasing costs associated with mining inputs and labour; the speculative nature of mineral exploration and development (including the risks of obtaining necessary licenses, permits and approvals from government authorities); the unlikelihood that properties that are explored are ultimately developed into producing mines; geological factors; actual results of current and future exploration; changes in project parameters as plans continue to be evaluated; soil sampling results being preliminary in nature and are not conclusive evidence of the likelihood of a mineral deposit; title to properties; and those factors described under the heading "Risks and Uncertainties" in the Company’s most recently filed management’s discussion and analysis. Although the forward-looking statements contained in this news release are based upon what management of the Company believes, or believed at the time, to be reasonable assumptions, the Company cannot assure shareholders that actual results will be consistent with such forward-looking statements, as there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking statements and information. There can be no assurance that forward-looking information, or the material factors or assumptions used to develop such forward-looking information, will prove to be accurate. The Company does not undertake any obligations to release publicly any revisions for updating any voluntary forward-looking statements, except as required by applicable securities law.

Neither the TSX Venture Exchange (the “Exchange”) nor its Regulation Services Provider (as that term is defined in the policies of the Exchange) accepts responsibility for the adequacy or accuracy of this news release.

Contact Information:

David D’Onofrio
Chief Executive Officer
White Gold Corp.
(416) 643-3880
ddonofrio@whitegoldcorp.ca

Subscribe to our Newsletter